 Stores in zip lock bag. Cuts like a hot knife through butter! 
  It took two of us ladies a minute or two, working together to cut a treated 4 inch square fence post. |
|
|
Neoprene Crupper : A crupper will hold the back of the saddle down, as well as keeping the saddle in place when going downhill. If you do not use a crupper when going downhill, your saddle may run into your mount's rotating shoulder, and /or the girth run into his elbow /arm pit area-with the potential of galling and soreing them terribly. It will also keep your saddle from ending up on your mount's neck! The proper use of a crupper can help alleviate both. This crupper has a pliable braided nylon core for strength, and is sleeved with soft Neoprene that actually doesn’t chafe! The tail loop has bridle snaps on both ends so it rides balanced and has a long center strap of black nylon webbing which can be easily adjusted either long or short for different backed horses. Stainless Steel Hardware. HVF-Exclusive. To properly adjust the crupper: Square your horse up, adjust the crupper so you can lift it off the rump 3-4 inches. The loop on this crupper can be purchase separately. Item # HR-C – Price $45.00 and Loop Item # HR-Loop - Price $20.00.
|
 |
|
 |
Neoprene Tail Protector: Designed to help prevent rubbing of tail-hair and protect the tailbone during trailer travel. An absolute must-have for horses that are hauled in straight-load trailers, who either sit or ride on their rear-ends against the butt bar or on the metal divide. (Trust me, it will take a complete summer for tail hair to grow back in--but over a year if the rub wears a bald spot into the tail.) Available in black, hunter green, red or royal blue. Specify color. Item # HR-TAIL - Price $15.00 |
 |
Bells:
Bells are commonly used to alert wild life when you are riding in an
area and are used on high-lines, picket-lines and fencing to alert
owners when things are getting out of control and require attention.
The large copper cowbell is copper and measures 4 x 3 x 2 and has a
deeper ring. The smaller liberty bell is brass and measures 2 x 2.5
inches and has a tingly ring. Item # HR-CB Price $4.50 cow bell or Item # HR-LB Price $2.00 for the liberty bell. |
 Video of use
|
Picket Line Tightener:
This "tight rope" is the ONLY way to tighten up your sagging picket/high line. It is so easy and yet ingenious (we were the inventor's
inspiration for this gizmo, after he saw us struggling with our
self-tightening knots). You may think about making one yourself but for
the price offered… forget it. Just order one, you will never be sorry.
How to use: Put your rope up and make it as tight as you can by hand.
Then position the two knobs of the tightener so that the rope runs
between them. Then firmly hold the tightener and begin to walk-twisting
the tightner so that the rope twists around the knobs of the tightner. When very tight, latch the clip on the line. HVF-Exclusive.
Item # HR-PT – Price $25.00 *Safety Tip* When horse camping, space your
leads 20 to 24 feet apart, giving each animal an area that is 10 to 12
feet. Set the length of the animals lead long enough where they can lie
down. Make sure that he is 8 to 10 feet away from any vehicle, trailer
or trees. |
 Why use a picket line? Go to questions |
Picket Fastener:
This fastener used on picket / high line ropes, is so simple that it
surpasses the others on the market. It is easy to use. This 3.5 inch
round ring is large enough to allow for the passing of a lead with a
knot at the end or for a picket line lead with a quick release snap. To
fasten this ring to your line, double the picket line rope into a loop
and pull it through the ring. Then reach through the loop, pulling the
ring back through, forming a "larks head knot". Fantastic! Item #
HR-PF - Price $3.00 *Safety Tip* When horse camping, space your leads 20 to 24 feet apart, giving each animal an area that is 10 to 12 feet. Set the length of the animals lead long enough where they can lie down. Make sure that he is 8 to 10 feet away from any vehicle, trailer or trees. |
|
No-Knot Eliminator
Picket Fastener: By popular demand, I’ve included this picket
fastener. If you use a line heavier than a half inch or a line with a
lot of stretch, (basically not the rope we sell) you will find that the
other picket fasteners will "pop" loose. With this No-Knot-Eliminator I
can absolutely guarantee a secure hold! Item # HR-KNOT - Price $5.99 *Safety Tip* When horse camping, space your leads 20 to 24 feet apart, giving each animal an area that is 10 to 12 feet. Set the length of the animals lead long enough where they can lie down. Make sure that he is 8 to 10 feet away from any vehicle, trailer or trees. |
  |
 The Horse Positioner:
At last a picket or high line fastener that you can put on both a
high-line cable and a picket rope too! A fastener that you can move
without lowering or loosening your high line/picket line. This
ingenious little loop attaches easily to rope or cable stays put and
will not slide. Position your hay bags, feed bags and horses and
reposition them with total ease. We offer a 2-inch ring for an
additional $1.00. This ring will allow for a quicker release of your
lead rope. To use the horse positioner: 1) Hold the positioner with your
hand by the copper crimp in front of the line and about 2" above it. 2)
With your other hand take the bottom of the "horse positioner" and bring
it up behind the picket line and through its self and over . 3) Repeat
step 2 two more times. 4) Pull the loop down and straighten the rope so
that copper clip is flat in front and the coils of rope are not over
each other. 5) To test, slide "the horse positioner" side to side with
your hand on the rope coils (not the bottom loop), next pull side ways
with the bottom loop and it will lock each way. 6) Note, if the loop is
too long, repeat step 2. Item # HR-HP - Price $4.00 each or 4 for $15.00 Optional ring - Price $1.00
|
 Video of use |
Picket Line Rope: At last here is the picket or "high line" rope you are looking for. This top quality poly rope has a soft broken in feel, with very little stretch. This rope comes only in red for easy visibility. (My youngest daughter was nearly taken out by a rope that she did not see and had a scar on her neck all summer.) I strongly recommend that you also have your picket leads in red as well. State length or at .40 cents a foot request a custom length. Item # HR-PR - Price for 30’ is $12.00, 50’ is $20.00, 75' is $30.00, 100' is $40.00 or any length in-between. *Safety Tip* When horse camping, space your
leads 20 to 24 feet apart, giving each animal an area that is 10 to 12
feet. Set the length of the animals lead long enough where they can lie
down. Make sure that he is 8 to 10 feet away from any vehicle, trailer
or trees. |
|
Picket Lead / Cross Tie: This
lead /cross tie is made in red for easy visibility, has a quick release
swivel panic snap on both ends or change out to a snap of your
choosing on the other end (for attachment to your horses halter). This lead is adjustable from 2 to
7 feet and designed in such a way that when adjusted short, will not
loop open, avoiding possible injury. HVF-Exclusive. Item # HR-PL -
Price $12.00 ** NEW OPTION** Select either of the all stainless steel snap on the left (trigger snap is stainless steel and swivels) or the snap on the right (safety spring snap) in exchange of the center snap (quick-release panic- nickel over iron) for the upgrade price of just $3.00! Any snap can be added or removed using a (Lark's
Head Knot) *Safety Tip* When horse camping, space your
leads 20 to 24 feet apart, giving each animal an area that is 10 to 12
feet. Set the length of the animals lead long enough where they can lie
down. Make sure that he is 8 to 10 feet away from any vehicle, trailer
or trees. |
 Video of How to use |
The High Line Picket Pole: No
more worrying about tying to trees or if there is nothing to tie to at
all. Now you can picket anywhere. Simply slide this into your RV’s, SUV's
or pick-up’s 2-inch receiver hitch. This unique pole will extend up
to 6 feet high plus the additional height of your hitch. Fasten the end
of your high line to your trailer, then run the rope through the ring at
the top of your "picket pole" and tie off with a "belaying" knot (a
continuous figure eight, securing the end by tucking it under the last
crossover) on the arms of the cleat. Quick and easy. Pole is strong 11 gauge
steel and weighs 22 lbs. Powder coat finish. HVF exclusive.
Actual shipping charges apply. HVF-Exclusive. Item # HR-PP - Price $69.00 Click for additional photo's. *Safety Tip* When horse camping, space your leads 20 to 24 feet apart, giving each animal an area that is 10 to 12 feet. Set the length of the animals lead long enough where they can lie down. Make sure that he is 8 to 10 feet away from any vehicle, trailer or trees. |
|
Video of use
|
Sure Knot Rope Cleat: Finally for those who cannot tie a good knot to save your life and also those who just do not want to struggle getting your tight knots undone. This rope cleat will take all of the guesswork out of knot-tying completely, plus the added safety of being able to perform a quick release FAST. A must for those who use picket lines. Just wrap your rope around this gizmo and then relax, knowing that your horses are secure. Steel powder coat finish, 10 inches long. HVF-Exclusive. Item # HR-RC - Price $10.00
|
 |
Video of use |
  The coil tie stretches LONG, so keep this in mind when selecting a place to keep your horse. I prefer the Picket leads that do not stretch when putting your horse on a picket or high line. This coil tie would be fine for the high tie/ride and tie/picket arm units that attaches to your trailer. |
  Coil•Tie
takes the hazardous sag and droop out of old fashioned cross ties and
front ties in the aisle, wash-stall, trailer, picket/high line or
anywhere you tie your horse. With no adjusting needed the Coil-Tie
stretches and retracts to follow the horse’s head, allowing the freedom
for him to eat and drink off the ground without stepping on a sagging
rope or having a lead that drags on the ground getting wet or under
foot. 7-foot lead. This tied is excellent for one horse on a high
line or on a high tie or spring tie arm, but personally not recommended
for more than one on a high line as it gives the horses too much
movement. If picketing more than one horse select the above lead. –
coil tie comes in black color only. Item # HR-CT $14.50
|
|
This will allow you to adjust the length of your rope as needed. Also recommended for slippery indoor surfaces.
This setting is a harder pull. Will hold your horse securely and still allow the animal to pull back if necessary. We recommend this setting for most situations.
Putting the rope all the way to the bottom of the clip will lock the rope in place for no pull. The Clip:
Video Question -
for you... |
 The Clip: Even the calmest of horses can struggle with pressure on occasion and "The Clip" solves this problem. When a horse is tied to something solid and pulls back and pressure is created at the horses poll. This pressure can sometimes induce a state of panic. "The Clip" allows relief from the pressure. If your horse were to pull back the panic is stopped before injury from falling, running away or have the neck snap. The clip keeps our horse safe inside and outside the trailer and is great on a picket line especially one that does not give. Item # HR-CLIP - Price $18.50 (reg$19.95)
|
 |
The Highline/tie-Picket-Arm: Now you can have it all. With this 3 in 1 product, that offers 3+ options in one easy package! First, you have the Highline option that will allow you to adjust hight in one-inch increments so run the high line from your trailer and tie off to another location. Second, by simply turning this pole upside down you have option two, an instant Picket-line attachment that you can also tie off from. Thirdly and best of all, when there is nothing to tie off too, you can easily add the flexible Arm Extension and have your horse cantilevered out from your trailer by 4 feet! Have all these functions in one complete package or piece them out. Complete package kit, includes powder coated 11 gauge steel mounting bracket with (1) 1/8 X 4 X 12 backer plate,( 1) 3/8 nut, (2) 3/8 washers,( 2) 3/8 X 2 1/2 inch button head cap mounting bolts, (2) quick adjustment pins (Specify thickness of trailer frame so the correct length can be sent), adjustable 4-foot ¾ inch flexible fiberglass pole assembly includes quick adjustment pin. HVF-Exclusive. The complete package: HR-PHLA – Price $285.00 The basic (without the arm extension): HR-PHL – Price $135.00 The add on (flexible arm extension): HR-PA – Price $170.00
|
 |
Ride-N-Tie: This is a easy and safe way of tethering your horse - four feet way from your trailer. This complete unit includes; the spring-loaded Ride-N-Tie arm, receiver, holding clamp and hardware. This unit will go onto all trailers except the Brender up and folds flat against the trailer for easy stowage. Made of all steel construction with easy instillation. Also available are additional receivers if you need multiple locations for a single horse on trailer. Complete unit (tether not included.) Item # HR-RNT Price $240.00. Additional receivers Item # HR-RN Price $35.00. |
 |
Trailer Tie: This nylon web trailer tie has a heavy easy open bull snap on one end and a panic release snap on the other. It's adjustable from 18-36 inches and will come only in the safety color, red. Item # HR-TT - Price $7.00 |
 Make your own halter.
|
Sta-Set Marine Rope: This is the rope that professionals use for making the high quality halters, lead ropes and loung lines. You may of handled this rope and wondered "where did they get that"? Well here it is. The 5/16 is used for making the rope halters (you will need 21 feet for this). Request instructions if you want to make your own or just buy it completed- see headstalls in the index. Red with white flecks. Item # HR- Rope - Price .75 cents per ft. |
|
|
Feed Scoop: I really like both the closed and open scoop. It holds up, is inexpensive, light-weight and you don’t have to worry about the feed falling out as you are carrying it. Size is 3 qt., select open or closed scoop. Item # HR-SC - Price $3.50 |
|
|
Measuring Cane: Now this is really neat. I’ve seen all kinds of measuring sticks and even the new modern ones can scare or startle a horse. (Real nice when you want them to stand still) This cane is not a cumbersome or scary. Easy to use and reads in centimeters or hands and has a level. Natural cane. (shipping will be $8.00 if ordered alone) Item # HR-CANE - Price $22.50 |
  |
Kwik
Cinch Barney Buckle: Easy tightening for western girths. This unique
buckle is thin and adds no extra bulk under your leg. The Barney Buckle
turns any cinch into a Smart Cinch, for you can use this buckle on any
size girth. Great if you have different sized horses that you ride who
require different cinch sizes or if you have difficulty mounting and
dismounting, because you can easily tighten your girth from the saddle!
Remember, if you ride for long periods of time in warm conditions, your
horse can lose up to 50 lbs. in body weight through sweating. So having
the ability to do a "Kwik cinch-up" is wonderful. Made of polished
stainless steel and leather. 3.5" x 2.5" w. For use on western saddles
that have a 1 to 13/4 inch latigo belt. The Kwik Cinch stays with
your saddle and can be used on any size western cinch. Selected as the
top 101 innovations for 2003 by Tack n’ Togs trade magazine.
HVF-Exclusive.Item # HR-KC - Price $24.99
|
|
|
English Girth Tightener:
By using leverage, this "belly buster" will allow you to girth up
even the biggest air bag of a horse! No more than 10 inches long you can
take this tightener with you on the trail. Make girthing up fast and
easy with this nifty device. (Warning: you can easily over tighten.) HVF
exclusive. Item # HR-BB - Price $19.95 |
|
|
Girth Converter: Made
exclusively for HVF, you can now convert a western girth to English!
Converter is made of top black grain leather with a center nylon core
for strength and stainless steel 1-inch roller buckles for easy girthing,
making this gadget so simple to use it takes no thinking at all and is
self-adjusting, enhancing comfort. HVF-Exclusive. Sold in a pair of two. Item
# HR-GC $18.00
|
|
|
 Convert: Western rigging to English:
The Western converter is a billet that attaches to your saddles D and
has English 1-inch billets for your girth to attach to. Made with top grain
leather on top and bottom with an inner core of nylon web for strength.
Comes with both laces and Chicago screws for easy attachment. Sold in Pairs. Black or brown color. HVF-Exclusive. Item # HR-CVW - Price
$24.00Folds right over saddles Dee / rigging ring and securely attached by using strings or Chicago screws provided.
|
|
Sold in a pairs |
  Slip
on Fenders:
Fenders for the English or endurance saddle. Instead of using half
chaps, tall riding boots or fleece comforters to protect legs from
getting pinched, horse sweat and mud. Simply thread one-inch leathers
through the slots and presto, instant fenders. Fenders are 14-inches
long and available in black or brown. Sold in a pair. Can be customized, leathers not
included. HVF-Exclusive.
Item # HR-F $45.00
. |
|
|
Western off billet: Leather billet with nylon reinforced webbing. Item # HR-OB – Price $20.00 Western latigo: Real latigo leather strap. Includes Chicago screws for attachment to saddle. Item # HR-WL – Price $30.00 English billets: Replacement pair of (one-inch) billets with screws. Call for style confirmation. Item # HR-EB - Price $30.00 Rear flank billets: Pair of leather billets on D’s for rear rigging on western saddle. Item # HR-RB - Price $40.00. |
|
Breast collar D’s: Stainless steel, these are the
D’s you need if you plan on using a breast collar. They will come with
screws for easy attachment. Item # HR-BD – Price $5.00 pr Accessory D’s: Stainless steel, these are those ever needed loops to hook everything to. They will come with screws for easy attachment. Item # HR-AD – $5.00 pr Footman’s loops with screws: Stainless steel brackets make for a welcome addition to your saddles fork or cantle. These are one inch diameter - stable and non-jingling. Item # HR-FL – Price $5.00 pr
Scissor Snap: These are nickel over brass 3/4 inch long snaps. These are wonderful for hooking all kinds of stuff, like reins and bags. Select round or square eye. Item # HR-SNAPS - Price $1.00 each
Saddle Strings: These strings are 30 inches long
an come on
Stainless steel rings, footman loops or D’s with screws. Please state color of strings
and hardware when ordering. Brown and Black are standard stock colors,
Stainless Steel Spring Snap. Four inches long - great for gaits and leads. Item # HR-SP - Price is $3.50
Panic Release Snap. Nickel over brass, for all tying applications using a Lark's Head knot. Item # HR-QR. price $2.00
Click here for photo's of these items in use and where to put them on your saddle |
|
|
|
Hoof Pick or Knife Holder: Comes with leather string for attachment to your saddle. Specify leather color. Item # HR-Holder - Price $12.00 |
|
|
Bridle Hook: Vinyl coated – black. Item # HR-BH – Price $2.50 |
 Photo showing size difference of "trail blocking" |
Blocking: This blocking Velcros onto the sweat flap of your
English saddle. You can replace worn out or lost
blocking or order an additional set. We now offer "Trail Blocking". This
blocking is larger and more supportive at 2.5 inches deep. Great for the
rider who needs extra leg support. Specify saddle style and type of
blocking. Sold in pairs, a HVF Exclusive. Item # HR-Block - Price
$30.00
|
|
Stand assembled |
Saddle Stand: This
beautiful, hand made, strong and sturdy pine saddle stand, is perfect in
your office, living room or show room for displaying your saddle. Comes
partially assembled and then assembles easily and comes unfinished so
that you can stain or paint it to match your decor. Height when
assembled is 33.5 inches. Actual shipping charges apply. Item # HR-SS -
Price $155.00 |
|
Saddle Up ® will lift your saddles up, out 24 inches, and down 20 inches from of your trailer. |
Won 1st place 2005 Kansas Inventors’ Congress for safety. Saddle –Up ®: New product available exclusively though Hill View Farms or factory installed in new trailers. When riding in Kansas, Carl showed me his idea, an idea I knew we could improve upon. So off to Ranch Handler we went and Saddle –Up ® was born and patented! Here is how it works. Designed for a standard rear tack compartment that is 36 inches deep. Saddle Up ® will lift your saddles out 24 inches, and down 20 inches from of your trailer and back in again. Making it easy to access, lift out and put away your saddles. NEVER AGAIN will you have to lift up or balance a saddle over your head. NO MORE falling backwards trying to stand balanced on the edge of your trailer when putting your saddle away or when trying to get your saddle out of the trailer by dragging it off of the top rack only to have it fall on you! Saddle –Up® is 72 inches tall, has 4 saddle racks holding up to 250 pounds of saddles with racks adjustable in one inch increments. Saddle –Up ® will come with a 12-volt ball screw actuator (which makes Saddle –Up ® go up, out and down), that can be wired either directly into your trailer wiring or to a battery (not included). Comes with lots of wire and rocker switch that is enclosed in a waterproof switch box with a safeguard cover for protection against accidental activation during travel. As an extra safety feature in case of electrical failure, there is a pull-pin allowing for manual override. The floor installation will consist of 2-inch channel iron, a mounting base plate that is 11 wide x 26 inches deep with four standard ½ inch bolt attachment sites but you can drill more if needed. . Most floors will require a minimum of 4) 3/8th inch bolts with large washers underneath (not included). The stand mast is made of 2-inch square steel tubing and frame is 1 x 2 inch iron tubing, all of which has a black Electro-static powder coat finish. At 80 lbs., this is one strong puppy! Some assembly required. (Saddle –Up ® is also available in custom sizing for saddle compartments that have generators under the saddle rack etc. and with an optional rack attachment for harnesses – call for pricing.) Item # HR-SUP – Price $1,499.00 42 second Video Clip |
|
|
Item # GR-Tub S (~ 4 gallons) Price $10.00 Item # GR-Tub M (~7 gallons) Price $12.00 Item # GR-Tub L (~10 gallons) Price $14.00 Item # GR-Tub XL (~20 gallon) Price $30.00 |
 |
 High
County Plastics: All tanks FDA Approved, safe for human consumption.30-gallon tank & saddle stand. Built for horse and stock trailers. A great space saving product with this 2-in-1 caddy-water tank and saddle rack that holds up to two saddles. The translucent plastic allows you to see water level in the tank. Weight: 22 lbs. Size: 44" L top x 13" W x 20" H (32" L bottom) Item# SKU: DC-1 - Price $78.00. Call for shipping - cost averages $30.00
|
 |
48-gallon half moon tank
that includes shut off water valve. Tank fits easily on either side of
gooseneck or along front inside wall of a straight load trailer. The
translucent plastic allows you to see water level in tank. Weight: 26 lbs.
Size: 63
1/2" L x 18" W x 12" H Item # SKU: HMLD-48 – Price $90.00
Call for shipping - cost averages $30.00
|
 |
  Call for shipping - cost averages $30.00 25-gallon capacity. Fits conveniently in the corner of your walk-in-tack room utilizing the "dead space" just inside your door. It features a fill hole with a vent at the top of the tank for easy filling. Located at the bottom the tank is a shut off valve to hook your hose to for filling water buckets. Tank specifications are: Weight: 22 lbs. Size(s): 14 3/4" on three sides x 56" H.
Water Tank: Item #
SKU: SL-25– Price $85.00 |
 |
18-gallon
capacity. The perfect tank for trailers that require a smaller tank;
features two shut-off valves to allow for multiple applications, place a
bucket under the upper valve and/or attach a hose to the lower valve.
Weight: 14.5 lbs. Size: 10 1/2" on two sides, 11 1/2" on one side x 72" H.
Item # SKU: SL-18 – Price $80.00
Call for shipping - cost averages $30.00
|
 |
 Fork Head: Fork head
- only. Select color of blue, purple, red, black.
Colors:
are teal, red, black, purple and royal blue.
Item # HR-FH Price $13.95
Basket Fork Head: Colors: purple, sky blue, black and royal blue Item # HR-FHB Price $14.95
Shown to right |
With EASY to use Stainless Steel clip snaps
Britching/breeching: This is REAL britichen that is user
friendly to all. Designed with horses in mind, sorry mules, it is not
about you anymore. Why use britching? Britching helps
stabilize a load more than any crupper, but it also is nicer to the
animal. Some horses and mules do not like a crupper, or they put
up their tail up or hold it off to the side and off goes the crupper.
Some critters have such a difficult tail set which makes it very hard to
properly set a crupper and the animal ends up galled or better yet,
ornery and may buck. Thanks to Ronda and Clete from CR Ass Ranch,
we took britching to a whole new level. Made just for your loved
one in mind. This britching is half the weight to anything else on the
market. Stronger than any leather and more stable with ten - yes
10) 1 inch soft nylon straps from 30 to 40 inches long to
accommodate both small and huge critters alike. All the hardware is
stainless, no more rust ever. The ten stainless steel sliders and
6 swivel trigger snaps make for quick and easy adjustments, on and off.
Gone for good are those horrible Conway buckles and dry, brittle –
rotten leather that is impossible to work with.
shown with tree hugger, rope and a rope cleat.
Options:
Hardware is available for Coil Tie, allowing for attachment to a high
line, trailer, wall, etc. The recommended hardware consists of two
snaps, one being a stainless steel spring snap (Item # HR-SP) $3.00 and the other a quick release snap (Item # HR-QR). is
$2.00 or $5.00 for the combination. Or you can eliminate the
spring snap and work the loop into a
Setting
1 - The Adjustment Setting
Setting
2 - Standard Setting
Setting
3 - Locked Setting
sold in pairs
rear flank
Crupper D: Stainless steel crupper D with
screws for easy attachment. Item # HR-CD – Price $3.00
Stainless Steel Trigger Snap. 4.5 inches
long with eye 11/4 inch- great for using in leads with a
Stand as it is shipped
TubTrugs:
The World's most flexible 2 handled tub! This tub is the most useful
tool for thousands of jobs around the home and garden. Great for
carrying, mixing, pouring, scooping, plastering, storing, washing,
gardening, pets the list of uses for your Tubtrug is literally endless!
Used by professionals the World over, Tubtrugs are fantastic for many
heavy-duty jobs, used by landscape gardeners, builders, plasterers,
mechanics and fishermen the World over. Two extremely strong handles and
flexible body make handling a Tubtrug much easier than any normal bucket
or tub. These tubs feature: Frost & UV proof means your Tubtrug wont
degrade in sunlight or frost, Super-strong handles, Tubtrugs come in a
massive range of sizes and colours and are flexible yet very, very
strong. Tubtrugs Flexible are suitable for everyone as they are the
containers you can trust to help you get the job done. Comes in assorted
colors and sizes S, M, L, XL: 